The Cohesion3d LaserBoard is one of the best upgrades regarding controller board for your laser machine. Lightburn works perfect with this controller and you are set for advanced engravings and a better work flow than […]
The original potentiometer is very limited and tend to break after a while creating problems for your work. Upgrade your pot to a 10-turn potentiometer to get better resolution and better power settings for your […]
If your machine does not have a mA-meter installed this is the first upgrade you should make for it. With a meter you can keep a eye on the power levels and stay within the […]
A lid switch is a easy security solution to prevent the laser from firing the beam while your lid on the machine is open. Its a very easy product, a micro switch with two cables. […]
Adding a extra 24V power supply to take the load off from your laser power supply is a good upgrade. Except from releaving the laser PSU from the power, you will also notice better control […]
Your power supply might be one of the first parts you might need. But stop, often it´s replacable parts inside that might be broken and it´s a easy replacement. Some might need soldering skills, others […]
This website is owned and maintaned by HP Persson - HawkCan Labs SA